How to Apply UV DTF Stickers: Complete Guide
Get professional results every time with these proven UV DTF sticker application techniques.
What You'll Need
Step 1: Prepare & Pre-Squeegee
Surface Preparation
Clean your application surface thoroughly using soap & water or a 50/50 mix of rubbing alcohol and water. Use a lint-free cloth to remove dirt and oil. Proper cleaning ensures your sticker endures weather and washing. Let the surface dry fully before applying.
Pre-Squeegee
Cut out your sticker, place it face down, and squeegee firmly across the entire design 2-4 times to ensure good adhesion, especially on thin elements.
Step 2: Peel the Transfer Film
Gently separate the two sheets while watching closely to ensure the design lifts onto the clear film. For delicate designs, peel slowly. If parts don't lift, lay it back down, squeegee again, and peel from another angle.
Step 3: Apply Your Sticker
Identify the target area. For small designs (4" & under), use both hands for precise placement. For larger designs (6" & up), apply from one side to avoid bubbles.
Step 4: Secure & Peel
After placing your design, squeegee 3-5 times. Peel slowly, gripping inward for better control. If parts aren't sticking, lay it back down and squeegee again. Practice makes perfect!
Pro Tips
- Work at room temperature.
- Use consistent, firm pressure when squeegeeing.
- Don't touch the adhesive side.
- Use flexible pressure for curved surfaces.
Care Instructions
Your UV DTF stickers are extremely durable and weather-resistant.
Have Questions?
Contact our support team for additional guidance on your UV DTF sticker application.
These instructions apply to all UV DTF sticker sizes and designs. Keep this guide handy for reference!